Photos and Graphics

You can easily add or change photos on your design from the Photos & Graphics section that is located on the right section of the Editor.

Please see below the Photos & Graphics basic options available on PixTeller.

  • Add image to your design page from search
  • Add image to your design page from your computer
  • Save image to My gallery
  • Remove image from My gallery
  • Add image to your design page from My gallery
  • Image resize
  • Image position
  • Image clipping position
  • Replace image
  • Crop image
  • Mask image
  • Set image as background
  • Image filters and effects

Add image to your design page from search

If you don’t know what images to add to your design, you can search for inspiration from over one million free photos and graphics available on the internet. After choosing and saving the images you want to use, you can easily add them to your design on PixTeller, just by following the next steps:

  1. 1. Open the Photos & Graphics section.
  2. 2. Click on the Add image button in order to open the images panel.
  3. 3. Search and choose the image you want to use for your design.
  4. 4. By pressing on desired image, an 100px width image will be added in the upper left corner of your design page.
Search and add image

Add image to your design page from your computer

If you already have the images you want to use on your PixTeller design, you can easily upload and use them, just by following the next steps:

  1. 1. Open the Photos & Graphics section.
  2. 2. Click on the Add image button in order to open the images panel.
  3. 3. Click on the Upload link located on the top of the images panel.
  4. 4. Press the Choose file button, browse and select the images you want to upload, press enter and your images will be added.
  5. 5. By pressing on desired image, an 100px width image will be added in the upper left corner of your design page.
Upload and add image

Save image to My gallery

You can save your favourite or most used images to My gallery section on PixTeller, so that you can use them anytime you want on your next designs.

In order to save images in My gallery section, you must follow the steps below:

  1. 1. Open the Photos & Graphics section.
  2. 2. Click on the Add image button in order to open the images panel.
  3. 3. Choose the image you want to save (you can also upload it by pressing on Upload link located on the top of the images panel).
  4. 4. Click on the Add to gallery button for each image you want to add.
Add image to my gallery

Remove image from My gallery

In order to remove an image from My gallery section, you must follow the steps below:

  1. 1. Open the Photos & Graphics section.
  2. 2. Click on the Add image button in order to open the images panel.
  3. 3. Click on the My gallery link located on the top-right of the images panel.
  4. 4. On the image you want to remove, click the Remove from gallery button in order to delete it from your gallery.
Remove image from my gallery

Add image to your design page from My gallery

Add image to your design page from My gallery

  1. 1. Open the Photos & Graphics section.
  2. 2. Click on the Add image button in order to open the images panel.
  3. 3. Click on the My gallery link located on the top-right of the images panel.
  4. 4. By pressing on the desired image, an 100px width image will be added in the upper left corner of your design page.

If you don’t save any images to your gallery, this section will remain empty. You will find it very useful when you will create new designs and want to use your preferred images, without having to search and upload them over and over again.

Image resize

By using our PixTeller Editor, you will maintain the original aspect ratio thanks to our Clipping Crop resize option. This mean that no matter the dimensions you choose for your image, it will look good.

You have two options to resize the images you use on your designs.

Option [1]

  1. 1. Click on the image you want to select.
  2. 2. Press on the image selection points and move your cursor to resize the image accordingly.

Option [2]

  1. 1. Click on the image you want to select.
  2. 2. Type in the appropriate values in the width/height inputs that is located in Photos & Graphics section and your image will resize according to the new specified dimensions.
Resize image

You can constrain the size (keep aspect ratio) of an image by choosing the Keep ratio option located in the left of width/height input, under the Photos & Graphics section.

Resize image inputs and keep aspect ratio button

Image position

You have two options to move the images you use in your designs.

Option [1]

  1. 1. Click on the image to select.
  2. 2. Press on the image selection points and move it according to your preference. You may also the guidelines useful.

Option [2]

  1. 1. Click on the image you want to select.
  2. 2. Type in the appropriate values in X/Y position input that is located in the Photos & Graphics section and your image will change its position according to the new coordinates.
Move image

The page origin (0,0) is located in the upper right corner of your design design page.

Image clipping position

By using our PixTeller Editor, you will maintain the original aspect ratio, thanks to our Clipping Crop resize option. This mean that no matter the dimensions you choose for your image, it will look good.

On PixTeller, you will find 9 clipping positions for an image. The default image clipping position is Center/Middle, but you can change it anytime by following the steps below:

  1. 1. Click on the image you want to select.
  2. 2. Click the buttons under the Clipping position title to set the image clipping position. You have the following positions to choose from: Left/Top, Center/Top, Right/Top, Left/Middle, Center/Middle, Right/Middle, Left/Middle, Center/Middle, Right/Middle. Any changes you make are instantly updated.
Clipping crop position

Replace image

You can easily replace the image of a design, whether we are talking about a template or public design you can find on PixTeller.

Please follow the next steps if you want to replace the image of a design:

  1. 1. Click on the image you want to select in order to change.
  2. 2. Click on the Replace image button in order to open the images panel.
  3. 3. Search, upload or choose one of the images from My gallery.
  4. 4. By pressing on desired image, the selected image will be replaced with the new one.
Replace image button

In order to make things easier for you, all the image properties will be kept, including the size, position, filters and more, so that you can create amazing designs just by replacing the images on any of our templates or public designs.

Crop image

In order to crop an image, you must follow the steps below:

  1. 1. Click on the image you want to select.
  2. 2. Click the Crop button located under the Photos & Graphics section to open the crop panel.
  3. 3. Select the image crop area and click on the Crop button in order to update the image.
Crop image

You can always go back to the initial size of the image, by opening the crop panel and change the area accordingly.

Mask image

By choosing this option, you will be able to add an image in one of the many shapes available on PixTeller. The default mask is rectangle.

Please follow the next steps in order to use the Mask image option:

  1. 1. Click on the image to select.
  2. 2. Click the Mask button located under the Photos & Graphics section to open the masking shapes panel.
  3. 3. Search and choose the shapes you want to use in order to mask your image.
  4. 4. By pressing the desired shape, the image will be masked according.
Mask image

You can always reset to default by setting a rectangle shape as mask.

Set image as background

You can easily set the background image of your PixTeller designs, just by following the next steps:

  1. 1. Click on the image you want to select.
  2. 2. Click the Set as background button that is located under the Photos & Graphics section in order to set the selected image as background.
Set image as background

Image filters and effects

In order to set or change the image filters, you must follow the steps below:

  1. 1. Click on the image you want to select.
  2. 2. Click on the Filters & Effects button under the Photos & Graphics section in order to open the filters panel.
  3. 3. Add effects or change the Border, Blur, Shadow, Skew, Brightness, HUE, RGB, etc values and your image will be accordingly updated.
Image filters button

We try to keep the PixTeller Editor constantly updated to new trends, by always bringing new filters and effects to choose from.